-
PRAG 30KVA Servo Stabilizer (80-260V)
Product specifications
- Model: TND-30KVA
- Input voltage: 80V-260V AC
- Power: 30KVA
- Technology: Servo Control Toroidal Transformer System
- Efficiency: > 97%
- Display: LED Digital Display
- Frequency: 50Hz/60Hz
- Delay Time: Short Delay (3-5 sec)
- Over-voltage protection: AC246 ± 4V
- High Temperature
- Short Circuit
- Output voltage: 220V ± 10%
- Phase: Single
- Dimension: 56 X 51 X 107
- Weight: 147 kg
-
PRAG 7.5KVA/48V Inverter 8 X 12V 220AH Battery 16 X 250W Solar Panel Roof-Top off-grid Complete Installation
- The PRAG Inverter is Easy to Install and Easy to Operate. This inverter is also Easy to Solve
- It is also designed to Operate under Harsh Environment
- The Inverter comes with the ability to do a DC Start & Automatic Self-Diagnostic Function
- It is Compatible with Both Linear & Non-Linear Load
- Low DC Voltage Supports Home & Office Appliances on the inverter
- With this PRAG Inverter, you can enjoy Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
- High Efficiency Inverter Design & “Power Saving Mode” to Conserve Energy
- Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
- 13 Vdc Inverter Battery Recover Point, Dedicated for Renewable Energy Systems
- 8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Inverter Batteries
- 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
- 8 ms Typical Transfer Time Between Utility & Inverter Battery, Guarantees Power Continuity
- 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
- Battery DOD(Depth of Discharge)setting from 50% to 100%
-
Q 200Ah 12v Amaron Quanta Tubular DryCell Batteries
- PPCP Containers with Low permeability to ensure that there is no water loss.
- –Side wall design to maintain structural integrity in high operating temperatures.
- –High Compression Absorbent Glass Mat (AGM) Separator for greater than 98% recombination efficiency.
- –Heavy duty L terminal best suited to carry high rate discharges.
- –Highly reliable one way self resealing safety vent seal.
- –MFX alloy grid for high design life in float @ 27° C with maximum cyclic life.
- –FLAPPON Terminal protecting system to prevent short circuits.
- –Ergonomic design for easy handling.
- –Grouping the plates by Cast-On-Strap leads to integral lead crystals
- –Provides superior corrosion resistance to negative strap.
- –Superior high rate discharge with low internal resistance.
₦420,000.00₦470,000.00Q 200Ah 12v Amaron Quanta Tubular DryCell Batteries
₦420,000.00₦470,000.00
-
SERNE 4 by 4 Breaker cover
Models HT4830S80-145 HT4840S80-145 HT4850S80-145 AC mode Rated input voltage 220/230Vac Input voltage range (170Vac~280Vac) ±2%/(90Vac-280Vac)±2% Frequency 50Hz/ 60Hz (automatic detection) Frequency range 47±0.3Hz ~ 55±0.3Hz (50Hz);57±0.3Hz ~ 65±0.3Hz (60Hz); Overload/short circuit protection Circuit breaker Efficiency >95% Conversion time (bypass andinverter) 10ms (typical) AC backflow protection yes Maximum bypass overload current 40A Inverting mode Output voltage waveform Pure sine wave Rated output power (VA) 3000(2600/2700/3000) 4000(3480/3600/3800/4000) 5000(4350/4500/4800/5000) Rated output power (W) 3000(2600/2700/3000) 4000(3480/3600/3800/4000) 5000(4350/4500/4800/5000) Power factor 1 Rated output voltage (Vac) 230Vac(200/208/220/240Vac Settable) Output voltage error ±5% Output frequency range (Hz) 50Hz ± 0.3Hz/60Hz ± 0.3Hz Efficiency >92% Overload protection (102%<load<125%) ±10%:=”” report=”” error=”” and=”” turn=”” off=”” output=”” after=”” 5=”” minutes;<=”” p=””></load<125%)> (125%<load<150%) ±10%:=”” report=”” error=”” and=”” turn=”” off=”” output=”” after=”” 10=”” seconds;<=”” p=””></load<150%)>
Load>150% ±10%: Report error and turn off output after 5 seconds;
Peak power 6000VA 8000VA 10000VA Loaded motor capacity 2HP 3HP 4HP Output short circuit protection Circuit breaker Bypass circuit breaker specification 63A Rated battery input voltage 48V (minimum starting voltage 44V) Battery voltage range 40.0Vdc~60Vdc ± 0.6Vdc (undervoltage alarm / shutdown voltage / overvoltage alarm / overvoltage recovery…LCD screen can be set) Eco mode Load ≤50W AC charge Battery type Lead acid or lithium battery Maximum charge current 60A Charge current error ± 5Adc Charge voltage range 40 –58Vdc Short circuit protection Circuit breaker Circuit breaker specification （AC IN）63A/（BAT）125A Overcharge protection Alarm and turn off charging in 1 minute. Solar charge Maximum PV open circuit voltage 145Vdc PV operating voltage range 60-145Vdc MPPT voltage range 60-115Vdc Battery voltage range 40-60Vdc Maximum output power 4200W PV charge current range (settable) 0-80A Charge short circuit protection BAT circuit breaker and fuse Wiring protection Reverse polarity protection Authentication specification Specification certification CE(EN62109) EMC certification level EN61000,C2 Operating temperature range -15°C to 55°C Storage temperature range -25°C ~ 60°C RH range 5% to 95% (conformal coating protection) Noise ≤60dB Heat dissipation Forced air cooling, adjustable air speed Communication interface USB/RS485 (WiFi/GPRS)/Dry Node Control Dimensions (L*W*D) 482mm*425mm*133mm Weight (kg) 13.3
-
SRNE 100A 48v 250v Solar Charge Controller
1. With the PowerCatcher MPPT technology, the controller is able to track the maximum power point of solar panels even in a complex environment. It has higher response speed and tracking efficiency compared with those controllers with traditional MPPT technology.2. The maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems. The charging efficiency is 15% to 20% higher than the conventional PWM method.3. MPPT Tracking efficiency is up to 99.9%.4. Advanced digital power technology raises the circuit energy conversion efficiency to 98%.5. The controller features a limited current charging mode. When the solar panel power exceeds a certain level and charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level.6. Support charging lithium batteries, gel batteries, sealed batteries and vented batteries, etc.7. The controller has an overheat protection mechanism. With charging line loss compensation, the voltage of the battery terminal can be accurately controlled.8. The controller features a limited current charging mode. When the solar panel power exceeds a certain level and charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level.9. The controller has an overheat protection mechanism. When the temperature exceeds the set value, the charging current will decline in linear proportion and discharging will be shut off so as to curb the temperature rise of the controller and keep the controller from being damaged by overheat.10. It supports parallel operation and meets need of greater charging power.11. With embedded bluetooth 4.0BLE module, it can achieve data interaction with APP on mobile phone.12. Supports standard Modbus protocol and provides protocol technology support to facilitate secondary development and application by users.13. Programmable relay output.
-
Srne 20Tubular
- A Battery made for everyone’s needs, be it with Solar or without Solar. No need to change battery if you convert to Solar
- All-Purpose Fast Charging and Long Lasting Inverter/UPS Battery with 200Ah Capacity at C20 Rating and 60 Months Warranty (36 Months Full Replacement + 24 Months Pro Rata Warranty)
- Genus provides Extremely Battery Preventive Maintenance Plans, so that you can get life of 6-7 years from this battery
-
SRNE 230Ah Genus Tubular
- Patented Carbon-based technology tubular battery for inverters
- Nano-materials that ensure that the battery plates are more resistant & durable
- High purity lead & thicker plate for robust performance
- Heavy-duty tubular battery delivering rugged Performance
- Robust grid design
- 230Ah/12V Tubular Battery with 25% longer life over Similar Products
- Improved Charge Acceptance
- Enhanced Backup Capacity
- Fits with all type of Inverters
- Deep Discharge Recovery & Charge Acceptance Characteristics
- High Acid Volumes Help With Lower Maintenance
- Fast Charging Capacity
- Resistance to Corrosion Improves Battery Life
- Clear Electrolyte Level Indicator
- Designed for demanding usage conditions
- Its technology allows for greater depth-of-discharge & delivers more charge cycles
- 24 Months Warranty
