• SERNE 4 by 4 Breaker cover

    Models HT4830S80-145 HT4840S80-145 HT4850S80-145
    AC mode
    Rated input voltage 220/230Vac
    Input voltage range (170Vac~280Vac) ±2%/(90Vac-280Vac)±2%
    Frequency 50Hz/ 60Hz (automatic detection)
    Frequency range 47±0.3Hz ~ 55±0.3Hz (50Hz);57±0.3Hz ~ 65±0.3Hz (60Hz);
    Overload/short circuit protection Circuit breaker
    Efficiency >95%
    Conversion time (bypass andinverter) 10ms (typical)
    AC backflow protection yes
    Maximum bypass overload current 40A
    Inverting mode
    Output voltage waveform Pure sine wave
    Rated output power (VA) 3000(2600/2700/3000) 4000(3480/3600/3800/4000) 5000(4350/4500/4800/5000)
    Rated output power (W) 3000(2600/2700/3000) 4000(3480/3600/3800/4000) 5000(4350/4500/4800/5000)
    Power factor 1
    Rated output voltage (Vac) 230Vac(200/208/220/240Vac Settable)
    Output voltage error ±5%
    Output frequency range (Hz) 50Hz ± 0.3Hz/60Hz ± 0.3Hz
    Efficiency >92%
    Overload protection (102%<load<125%) ±10%:=”” report=”” error=”” and=”” turn=”” off=”” output=”” after=”” 5=”” minutes;<=”” p=””></load<125%)>

    (125%<load<150%) ±10%:=”” report=”” error=”” and=”” turn=”” off=”” output=”” after=”” 10=”” seconds;<=”” p=””></load<150%)>

    Load>150% ±10%: Report error and turn off output after 5 seconds;

    Peak power 6000VA 8000VA 10000VA
    Loaded motor capacity 2HP 3HP 4HP
    Output short circuit protection Circuit breaker
    Bypass circuit breaker specification 63A
    Rated battery input voltage 48V (minimum starting voltage 44V)
    Battery voltage range 40.0Vdc~60Vdc ± 0.6Vdc (undervoltage alarm / shutdown voltage / overvoltage alarm / overvoltage recovery…LCD screen can be set)
    Eco mode Load ≤50W
    AC charge
    Battery type Lead acid or lithium battery
    Maximum charge current 60A
    Charge current error ± 5Adc
    Charge voltage range 40 –58Vdc
    Short circuit protection Circuit breaker
    Circuit breaker specification (AC IN)63A/(BAT)125A
    Overcharge protection Alarm and turn off charging in 1 minute.
    Solar charge
    Maximum PV open circuit voltage 145Vdc
    PV operating voltage range 60-145Vdc
    MPPT voltage range 60-115Vdc
    Battery voltage range 40-60Vdc
    Maximum output power 4200W
    PV charge current range (settable) 0-80A
    Charge short circuit protection BAT circuit breaker and fuse
    Wiring protection Reverse polarity protection
    Authentication specification
    Specification certification CE(EN62109)
    EMC certification level EN61000,C2
    Operating temperature range -15°C to 55°C
    Storage temperature range -25°C ~ 60°C
    RH range 5% to 95% (conformal coating protection)
    Noise ≤60dB
    Heat dissipation Forced air cooling, adjustable air speed
    Communication interface USB/RS485 (WiFi/GPRS)/Dry Node Control
    Dimensions (L*W*D) 482mm*425mm*133mm
    Weight (kg) 13.3
  • SERNE DC Breaker 500v 2P 125A

    125A/500V (2 POLE) DC CIRCUIT BREAKERS

    IDEAL FOR SMALL TO MEDIUM BATTERY BACKUP BANKS.
    PROTECTION FOR INVERTERS.
    500VDC MAX DC INPUT/OUTPUT.
    125A MAX DC INPUT/OUTPUT

    125A/500V (2 POLE) DC CIRCUIT BREAKERS

  • SRNE DC breaker 500v 2p 63A

    63A/120-500V (2 POLE) DC CIRCUIT BREAKERS

    IDEAL FOR SMALL TO MEDIUM BATTERY BACKUP BANKS.
    PROTECTION FOR INVERTERS.
    120-500VDC INPUT/OUTPUT.
    63A MAX DC INPUT/OUTPUT.

    63A/120-500V (2 POLE) DC CIRCUIT BREAKERS

  • SRNE SPD DC

    Model:MPPT Solar & Generator DC Charging Controller MD4830N06

    Backup Battery System Voltage:12V/24V/48V

    Backup Battery Voltage Range:9~60V DC

    Rated Charging Current:30A

    Maximum PV Input Current:100A

     

    ◆Sealedbattery,gelbattery, vented battery, lithium battery and user-defined battery can all be used as back up battery.
    ◆ Available for intelligent generator and conventional generator, automatic recognition of generatortype through ignition signal.
    ◆ The charging working modes divides into PV charges backup battery, generator charges back up battery,PV and generator charge back up battery and PV charges starter battery.
    ◆Back up battery charging voltage line loss compensation function makes thebattery charging voltage control more accurate.
    ◆Back up battery temperature sampling function and temperature compensation function of lead-acidbattery can effectively extendthe lifespan of battery.
    ◆High temperature charging automatic derating function
    ◆ Pouring sealant treatment to ensure reliable and efficient operation in various working environments.

  • SRNE 100A 48v 250v Solar Charge Controller

    1. With the PowerCatcher MPPT technology, the controller is able to track the maximum power point of solar panels even in a complex environment. It has higher response speed and tracking efficiency compared with those controllers with traditional MPPT technology.
    2. The maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems. The charging efficiency is 15% to 20% higher than the conventional PWM method.
    3. MPPT Tracking efficiency is up to 99.9%.
    4. Advanced digital power technology raises the circuit energy conversion efficiency to 98%.
    5. The controller features a limited current charging mode. When the solar panel power exceeds a certain level and charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level.
    6. Support charging lithium batteries, gel batteries, sealed batteries and vented batteries, etc.
    7. The controller has an overheat protection mechanism. With charging line loss compensation, the voltage of the battery terminal can be accurately controlled.
    8. The controller features a limited current charging mode. When the solar panel power exceeds a certain level and charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level.
    9. The controller has an overheat protection mechanism. When the temperature exceeds the set value, the charging current will decline in linear proportion and discharging will be shut off so as to curb the temperature rise of the controller and keep the controller from being damaged by overheat.
    10. It supports parallel operation and meets need of greater charging power.
    11. With embedded bluetooth 4.0BLE module, it can achieve data interaction with APP on mobile phone.
    12. Supports standard Modbus protocol and provides protocol technology support to facilitate secondary development and application by users.
    13. Programmable relay output.
  • 3.3Kva 48v Inverter 145v

    1. It adopts full-digital double closed loop control, combined with advanced SPWM technology to output pure sine wave.
    2. Two output modes: mains electricity bypass and inverter output; uninterrupted power supply.
    3. Four charging modes: PV Only, Mains Electricity Priority, PV Priority and PV&Mains Electricity hybrid charging.
    4. Advanced MPPT technology with 99.9% efficiency.
    5. User-defined charging parameters setting(voltage, current and mode), and suitable for various types of energy storage batteries.
    6. Rocker switch for AC output control.
    7. Power saving mode, reduce no-load loss.
    8. Intelligent variable-speed fan to efficiently dissipate heat and extend system lifespan.
    9. Lithium battery activation function, allow lead-acid battery and lithium battery access.
    10. All-round protection for solar panels includes overload and short circuit protection, under-voltage and over-voltage protection and reverse polarity protection.
    11. Support variety of user-friendly communication modules, such as RS485(GPRS, WiFi, Bluetooth), CAN and USB etc., and feasible to connect with computer and mobile phone to realize remote control.
    12. Available for 6 units parallel operation.
  • SRNE 3Kva 24V Inverter 100v

    1. It adopts full-digital double closed loop control, combined with advanced SPWM technology to output pure sine wave.
    2. Two output modes: mains electricity bypass and inverter output; uninterrupted power supply.
    3. Four charging modes: PV Only, Mains Electricity Priority, PV Priority and PV&Mains Electricity hybrid charging.
    4. Advanced MPPT technology with 99.9% efficiency.
    5. User-defined charging parameters setting(voltage, current and mode), and suitable for various types of energy storage batteries.
    6. Rocker switch for AC output control.
    7. Power saving mode, reduce no-load loss.
    8. Intelligent variable-speed fan to efficiently dissipate heat and extend system lifespan.
    9. Lithium battery activation function, allow lead-acid battery and lithium battery access.
    10. All-round protection for solar panels includes overload and short circuit protection, under-voltage and over-voltage protection and reverse polarity protection.
    11. Support variety of user-friendly communication modules, such as RS485(GPRS, WiFi, Bluetooth), CAN and USB etc., and feasible to connect with computer and mobile phone to realize remote control.
  • SRNE 3.3 kva 24v Inverter 500v

    Place of Origin
    China
    Output Voltage
    220/230v
    Output Frequency
    50Hz/ 60Hz
    Size
    378*280*103mm
    Inverter Efficiency
    >95%
    Warranty
    18 months
    Brand Name
    SRNE
    Output voltage waveform
    Pure sine wave
    Certificate
    CE(IEC/EN62109-1,-2),ROHS2.0
    Rated power
    3.3kw
    Color
    White
    AC charge current
    80A
    PV charge current
    0-80A
    Wifi function
    support
    Maximum PV open circuit voltage
    500V
    Battery type
    Lead acid or lithium battery
    Weight
    6.9kg
  • SRNE 5kva 145v Inverter (Parallel)

    1. It adopts full-digital double closed loop control, combined with advanced SPWM technology to output pure sine wave.
    2. Two output modes: mains electricity bypass and inverter output; uninterrupted power supply.
    3. Four charging modes: PV Only, Mains Electricity Priority, PV Priority and PV&Mains Electricity hybrid charging.
    4. Advanced MPPT technology with 99.9% efficiency.
    5. User-defined charging parameters setting(voltage, current and mode), and suitable for various types of energy storage batteries.
    6. Rocker switch for AC output control.
    7. Power saving mode, reduce no-load loss.
    8. Intelligent variable-speed fan to efficiently dissipate heat and extend system lifespan.
    9. Lithium battery activation function, allow lead-acid battery and lithium battery access.
    10. All-round protection for solar panels includes overload and short circuit protection, under-voltage and over-voltage protection and reverse polarity protection.
    11. Support variety of user-friendly communication modules, such as RS485(GPRS, WiFi, Bluetooth), CAN and USB etc., and feasible to connect with computer and mobile phone to realize remote control.
    12. Available for 6 units parallel operation.
  • SRNE 5kva 145v Inverter

    1.Anti-backflow grid connection function, support for inverter and mains power hybrid output,

    support for use without battery, can be set up for on-grid power generation.

    2.Two output modes: mains bypass and inverter output; uninterrupted power supply.

    3.Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar

    hybrid charging.

    4.Advanced MPPT technology with an efficiency of 99.9%.

    5.Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.

    6.With time slot control, you can set the priority of using the mains and battery according to the time slot in conjunction with the local peak and valley tariffs.

    7.Power saving mode available to reduce no-load loss.

    8.Intelligent variable speed fan efficiently dissipate heat and extend system life.

    9.Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery.

    10.360 ° all-around protection with a number of protection functions.

    11.Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.

Main Menu