-
SRNE 100A 48v 250v Solar Charge Controller
1. With the PowerCatcher MPPT technology, the controller is able to track the maximum power point of solar panels even in a complex environment. It has higher response speed and tracking efficiency compared with those controllers with traditional MPPT technology.2. The maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems. The charging efficiency is 15% to 20% higher than the conventional PWM method.3. MPPT Tracking efficiency is up to 99.9%.4. Advanced digital power technology raises the circuit energy conversion efficiency to 98%.5. The controller features a limited current charging mode. When the solar panel power exceeds a certain level and charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level.6. Support charging lithium batteries, gel batteries, sealed batteries and vented batteries, etc.7. The controller has an overheat protection mechanism. With charging line loss compensation, the voltage of the battery terminal can be accurately controlled.8. The controller features a limited current charging mode. When the solar panel power exceeds a certain level and charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level.9. The controller has an overheat protection mechanism. When the temperature exceeds the set value, the charging current will decline in linear proportion and discharging will be shut off so as to curb the temperature rise of the controller and keep the controller from being damaged by overheat.10. It supports parallel operation and meets need of greater charging power.11. With embedded bluetooth 4.0BLE module, it can achieve data interaction with APP on mobile phone.12. Supports standard Modbus protocol and provides protocol technology support to facilitate secondary development and application by users.13. Programmable relay output. -
Srne 20Tubular
- A Battery made for everyone’s needs, be it with Solar or without Solar. No need to change battery if you convert to Solar
- All-Purpose Fast Charging and Long Lasting Inverter/UPS Battery with 200Ah Capacity at C20 Rating and 60 Months Warranty (36 Months Full Replacement + 24 Months Pro Rata Warranty)
- Genus provides Extremely Battery Preventive Maintenance Plans, so that you can get life of 6-7 years from this battery
-
SRNE 230Ah Genus Tubular
- Patented Carbon-based technology tubular battery for inverters
- Nano-materials that ensure that the battery plates are more resistant & durable
- High purity lead & thicker plate for robust performance
- Heavy-duty tubular battery delivering rugged Performance
- Robust grid design
- 230Ah/12V Tubular Battery with 25% longer life over Similar Products
- Improved Charge Acceptance
- Enhanced Backup Capacity
- Fits with all type of Inverters
- Deep Discharge Recovery & Charge Acceptance Characteristics
- High Acid Volumes Help With Lower Maintenance
- Fast Charging Capacity
- Resistance to Corrosion Improves Battery Life
- Clear Electrolyte Level Indicator
- Designed for demanding usage conditions
- Its technology allows for greater depth-of-discharge & delivers more charge cycles
- 24 Months Warranty
-
SRNE DC breaker 500v 2p 63A
63A/120-500V (2 POLE) DC CIRCUIT BREAKERS
IDEAL FOR SMALL TO MEDIUM BATTERY BACKUP BANKS.
PROTECTION FOR INVERTERS.
120-500VDC INPUT/OUTPUT.
63A MAX DC INPUT/OUTPUT.63A/120-500V (2 POLE) DC CIRCUIT BREAKERS
-
Srne Lithium Ion Battery 48v 5.12KW
- Model: ES-5.12KWH.
- Warranty: 5 years.
- Rated Capacity (5HR): 110Ah.
- Voltage: 51.2V.
- Discharge Cutoff Voltage: 40.0V.
- Equalised Charge Voltage: 58.4V.
- Maximum Charging Current: 100A.
- Maximum Discharging Current: 100A.
- C. Rating: 1.0C.
- Display: LCD.
- Parallel: Parallel connection up to 15 packs with full communications.
- Dimensions (WxDxH): 505mm x 162mm x 543mm.
- Ports: 1x CAN Bus, 1x RS-485 Battery Link ports, 2x Parallel Instruction Ports.
- Cells: New Li-Ion Prismatic Cells.
- Design Life: -/+ 15 Years.
- Cycle Life @ 1C: +/-4000 Cycles @ 100% DOD, Above 6000 cycles @ 80% DOD.
- Certification: CE, UN38.3, IEC, MSDS.
- Outer Package Material: White bske lacquer steel case.
- Operating Temperature: Charging: 0 to 50°C, Discharging: -10 to 50°C, Storage: -10 to 50°C.
- Protection: Electronic Circuit Breaker, BMS Voltage Protection, Current Limiting.
-
SRNE SPD DC
Model:MPPT Solar & Generator DC Charging Controller MD4830N06
Backup Battery System Voltage:12V/24V/48V
Backup Battery Voltage Range:9~60V DC
Rated Charging Current:30A
Maximum PV Input Current:100A
◆Sealedbattery,gelbattery, vented battery, lithium battery and user-defined battery can all be used as back up battery.
◆ Available for intelligent generator and conventional generator, automatic recognition of generatortype through ignition signal.
◆ The charging working modes divides into PV charges backup battery, generator charges back up battery,PV and generator charge back up battery and PV charges starter battery.
◆Back up battery charging voltage line loss compensation function makes thebattery charging voltage control more accurate.
◆Back up battery temperature sampling function and temperature compensation function of lead-acidbattery can effectively extendthe lifespan of battery.
◆High temperature charging automatic derating function
◆ Pouring sealant treatment to ensure reliable and efficient operation in various working environments. -
Sukam OnLine UPS 3kVA/180V 1-Phase to 1-Phase ‘Intelli’
- Wide Input Voltage & Frequency Window
- Built-in Galvanic Isolation Transformer
- Auto-self Test on LCD Panel
- Fuzzy Logic Controlled battery charging
- Intelligent Battery Management
- Scalable Runtime
- Cold Start
-
TBB 5KW-48V Apollo Maxx 5.0S Solar Hybrid Inverter
Transformer BasedAll in one, plug and play design for easy installationApplicable for DC coupling system, solar hybrid system and power backup systemParallel and three phase capabilityTypical 0ms UPS class transfer speed, max<2msPower assist & power control enable small generator to handle big loads and meet the demand of the limited gridExtremely high inverter efficiency up to 96%Extremely high MPPT efficiency up to 98%Harmonic Distortion<2%Extremely low self-consumption powerHigh performance designed for all kinds of inductive loadsTBB premium II battery charging managementBuilt in battery SOC estimationEqualization charging program available for flooded and OPZS batteryLithium Battery charging availableBuilt in AGS functionFully programmable by APPRemote monitoring and control via Nova online portal -
TBB RiiO 3KVA-24V Inverter Charger
3KVA-24V Solar Hybrid Pure Copper Low Frequency Transformer based
Optional remote monitoring Eco mode/Power assistGenerator power assist function enables small generators to handle big loadsLoad boost function for running the heavy duty loadsSave 45% energy at max under the built in ECO Mode (30% on average)Extremely high inverter efficiency up to 94%Harmonic distortion <2%Extremely low self-consumption powerHigh performance designed for all kinds of inductive loadsTBB premium II battery charging managementBuilt-in SOC estimationEqualization charging program available for flooded and OPZS batteryLithium battery charging availableFully programmable by APPRemote monitoring and control via Nova online portal -
TBB RiiO 3KVA-M 24V Inverter Charger
Generator power assist function enables small generators to handle big loadsLoad boost function for running the heavy duty loadsSave 45% energy at max under the built in ECO Mode (30% on average)Extremely high inverter efficiency up to 94%Harmonic distortion <2%Extremely low self-consumption powerHigh performance designed for all kinds of inductive loadsTBB premium II battery charging managementBuilt in SOC estimationEqualization charging program available for flooded and OPZS batteryLithium battery charging availableFully programmable by APPRemote monitoring and control via Nova online portal