-
APC Smart-UPS 1500VA LCD 230V
APC Smart-UPS C 1500VA LCD 230V SMC1500I Uninterruptible Power Supplies (UPS)
– Battery-protected and surge-only outlets reserves power capacity and run time for connected equipment– Network manageable Provides remote power management of the UPS over the network– LED status indicators quickly understand unit and power status with visual indicators– Hot-swappable batteries ensures clean, uninterrupted power to protected equipment while batteries are being replaced– Adjustable voltage-transfer points maximizes useful battery life by widening the input voltage
-
APC Smart-UPS 1500VA USB & Serial 230V SMC1500I
Specification:
- Battery: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Battery Life: 3 hour(s)
- Interface: DB-9 RS-232, SmartSlot, USB
- Color: Black
- Part Number: SMC1500I
- Control Panel: LED status display with load and battery bar-graphs and On Line
- On Battery : Replace Battery : and Overload Indicators
-
APC Smart-UPS 1500VA – SMC1500I
- The APC Smart-UPS SMC Series offers guaranteed battery backup and surge protection for entry-level servers, small switches, networking devices, and point-of-sale (POS) equipment
- max. Output 1.500 VA / 900 Watts – Tower model
- Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
- Content of delivery: Smart UPS SMC User manual USB Cable Shutdown Software
-
APC Smart-UPS 3000VA 230V
Key Features- Output power capacity…………………….2.7kilowatts/3KVA
- Nominal Output Voltage…………………..230V
- Output voltage distortion………………….less than 5% at full load
- Topology………………………………………..Line Interative
- Waveform type……………………………….Sine wave
- Typical reccharge tim………………………3 hours
- Exected battery life…………………………3-5 years
- Interface ports……………………………….Smartslots,USB
- Surge Energy rating……………………….365 joules
- warranty………………………………………..two years warranty from date of purchase.
-
APC Smart-UPS 750VA LCD 230V – SMT750I
- Output Power Capacity: 500 Watts / 750 VA
- Max Configurable Power: 500 Watts / 750 VA
- Nominal Output Voltage: 230V
- Output Voltage Distortion: Less than 5% at full load
- Topology: Line Interactive
- Waveform Type: Sine wave
- Other Input Voltages: 220, 240
-
APC Smart-UPS SRT 6000VA 230V – SRT6KXLI
Specification:
- Output Power Capacity: 2700 Watts / 3000 VA
- Max Configurable Power: 2700 Watts / 3000 VA
- Nominal Output Voltage: 230V
- Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
- Efficiency at Full Load: 95.0%
- Output Voltage Distortion: Less than 5% at full load
- Output Frequency (sync to mains): 47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal
- Topology: Line Interactive
- Waveform Type: Sine wave
- Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 3 hour(s)
- Replacement Battery: RBC55
-
MPPT Solar Charging Controller MA2460N15
◆Using MPPT technology, the tracking efficiency of MPPT can reach 99.9%.
◆Support CAN communication function (optional).
◆Supports a wide variety of batteries such as sealed, colloidal, open-type, lithium battery and user-customized battery.
◆Support line loss compensation of charging voltage, so that the battery charging voltage control is more accurate (partial models).
◆Support starting capacitive load and inductive load.
◆RS485 communication supporting standard Modbus protocol, with baud rate adjustable.
◆Support TTL communication of standard Modbus protocol, with baud rate fixed.
◆With perfect charging and discharging protection mechanism such as supervoltage, overcurrent, overload, overtemperature and short-circuiting.
◆ Using high-quality aluminum radiator and high-temperature derating processing can ensure reliable and efficient operation in each work environment.
