• CHRISOLAR 5KW 48V HYBRID INVERTER 80A (MPPT 145V – PV

    •  Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
    •  Two output modes: mains bypass and inverter output; uninterrupted power supply.
    •  Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.
    •  Advanced MPPT technology with an efficiency of 99.9%.
    •  With the charging requirement (voltage, current, mode) settings, and suitable for various types of energy storage batteries.
    •  ON/OFF rocker switch for AC output control.
    •  Power saving mode available to reduce no-load loss.
    •  Intelligent variable speed fan to efficiently dissipate heat and extend system life.
    •  Lithium battery activation design, allowing access of lead-acid battery and lithium battery.
    •  360 all-round protection with a number of protection functions. Such as overload, short circuit and over current.
    •  Supply of a variety of user-friendly communication modules, such as Rs485 (GPRS, Wi-Fi), CAN, USB etc.,
    •  It is suitable for computer, mobile phones, and Internet monitoring as well as remote operations.
  • CHRISOLAR 5KW 48V HYBRID INVERTER 80A (MPPT 145V – PV)

    •  Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
    •  Two output modes: mains bypass and inverter output; uninterrupted power supply.
    •  Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.
    •  Advanced MPPT technology with an efficiency of 99.9%.
    •  With the charging requirement (voltage, current, mode) settings, and suitable for various types of energy storage batteries.
    •  ON/OFF rocker switch for AC output control.
    •  Power saving mode available to reduce no-load loss.
    •  Intelligent variable speed fan to efficiently dissipate heat and extend system life.
    •  Lithium battery activation design, allowing access of lead-acid battery and lithium battery.
    •  360 all-round protection with a number of protection functions. Such as overload, short circuit and over current.
    •  Supply of a variety of user-friendly communication modules, such as Rs485 (GPRS, Wi-Fi), CAN, USB etc.,
    •  It is suitable for computer, mobile phones, and Internet monitoring as well as remote operations.
  • CHRISOLAR 60A 48V, MPPT SOLAR CHARGE CONTROLLER

    • Automatic equipment production: standardized quality, high-efficiency production.
    • ❖Three-stage smart charging, Adjustable parameters by pressing buttons, 12V/24V/48V adaptive.
    • ❖Production: High voltage protection, overload protection, Battery reverse connected protection, Low voltage protection, overheating protection, Output short-circuit protection.
    • ❖The maximum utilization rate of solar energy can reach 99%, with a super-fast charging algorithm, efficiency increased by 30%.
  • POWERHUB 20KVA Voltage Stabiliizer

    This Stabilizer is designed to regularize incoming NEPA/Generator voltage for all electrical and electronic appliances at homes, offices, medical & laboratory, ICT, and data centers.
    SVS Stabilizer is a one size fit all device to address all electrical-related problems and it has these unique features as a comparative advantage over others, wide input voltage(80V-270V), ruggedness, and stability.
    The SVS Technology is based on Servo Motor Control System plus Micro compute programmed control to prevent over or under voltage against home or office appliances connected with the Stabilizer.
    Our 30 kVA voltage stabilizer static and servo-controlled solutions help your loads to have TV / Radio transmitter stations, GSM base stations, image and sound production studios, air – conditioners medical devices, hospitals, neon and laser illuminations, press and textile machines, photograph press machines, submerging pumps, ships, electric motors and all electrical devices sensitive to voltage changes.

  • Q 200Ah 12v Amaron Quanta Tubular DryCell Batteries

    • PPCP Containers with Low permeability to ensure that there is no water loss.
    • –Side wall design to maintain structural integrity in high operating temperatures.
    • –High Compression Absorbent Glass Mat (AGM) Separator for greater than 98% recombination efficiency.
    • –Heavy duty L terminal best suited to carry high rate discharges.
    • –Highly reliable one way self resealing safety vent seal.
    • –MFX alloy grid for high design life in float @ 27° C with maximum cyclic life.
    • –FLAPPON Terminal protecting system to prevent short circuits.
    • –Ergonomic design for easy handling.
    • –Grouping the plates by Cast-On-Strap leads to integral lead crystals
    • –Provides superior corrosion resistance to negative strap.
    • –Superior high rate discharge with low internal resistance.
    420,000.00470,000.00
  • TBB 5KW-48V Apollo Maxx 5.0S Solar Hybrid Inverter

    Transformer Based
    All in one, plug and play design for easy installation
    Applicable for DC coupling system, solar hybrid system and power backup system
    Parallel and three phase capability
    Typical 0ms UPS class transfer speed, max<2ms
    Power assist & power control enable small generator to handle big loads and meet the demand of the limited grid
    Extremely high inverter efficiency up to 96%
    Extremely high MPPT efficiency up to 98%
    Harmonic Distortion<2%
    Extremely low self-consumption power
    High performance designed for all kinds of inductive loads
    TBB premium II battery charging management
    Built in battery SOC estimation
    Equalization charging program available for flooded and OPZS battery
    Lithium Battery charging available
    Built in AGS function
    Fully programmable by APP
    Remote monitoring and control via Nova online portal
  • TBB RiiO 3KVA-24V Inverter Charger

    3KVA-24V Solar Hybrid Pure Copper Low Frequency Transformer based
    Optional remote monitoring Eco mode/Power assist

     

    Generator power assist function enables small generators to handle big loads
    Load boost function for running the heavy duty loads
    Save 45% energy at max under the built in ECO Mode (30% on average)
    Extremely high inverter efficiency up to 94%
    Harmonic distortion <2%
    Extremely low self-consumption power
    High performance designed for all kinds of inductive loads
    TBB premium II battery charging management
    Built-in SOC estimation
    Equalization charging program available for flooded and OPZS battery
    Lithium battery charging available
    Fully programmable by APP
    Remote monitoring and control via Nova online portal
  • TBB RiiO 3KVA-M 24V Inverter Charger

    Generator power assist function enables small generators to handle big loads
    Load boost function for running the heavy duty loads
    Save 45% energy at max under the built in ECO Mode (30% on average)
    Extremely high inverter efficiency up to 94%
    Harmonic distortion <2%
    Extremely low self-consumption power
    High performance designed for all kinds of inductive loads
    TBB premium II battery charging management
    Built in SOC estimation
    Equalization charging program available for flooded and OPZS battery
    Lithium battery charging available
    Fully programmable by APP
    Remote monitoring and control via Nova online portal
  • TBB RiiO 3KVA-M 48V Inverter Charger

    Generator power assist function enables small generators to handle big loads
    Load boost function for running the heavy duty loads
    Save 45% energy at max under the built in ECO Mode (30% on average)
    Extremely high inverter efficiency up to 94%
    Harmonic distortion <2%
    Extremely low self-consumption power
    High performance designed for all kinds of inductive loads
    TBB premium II battery charging management
    Built in SOC estimation
    Equalization charging program available for flooded and OPZS battery
    Lithium battery charging available
    Fully programmable by APP
    Remote monitoring and control via Nova online portal

Main Menu