-
208L DCF208 SOLAR FREEZER
- Total Storage Capacity: 200L
- Operating Voltage: 12/24VDC AC220V
- Rated Power :93W
- Refrigerant:R-134a
- Foam Thickness: 80MM
-
208L DCR208 SOLAR FRIDGE
- Capacity: 118L
- Operating Voltage: 12/24VDC AC220V
- Rated Power :81W
- Refrigerant:R-134a
- Foam Thickness: 80MM
-
208L DCR208 SOLAR FRIDGE (Copy)
- Capacity: 168L
- Operating Voltage: 12/24VDC AC220V
- Rated Power :105W
- Refrigerant:R-134a
- Foam Thickness: 80MM
-
258 Liters SOLAR FRIDGE
- Total Storage Capacity: 215L
- Operating Voltage: 12/24VDC AC220V
- Rated Power :105W
- Refrigerant:R-134a
- Foam Thickness: 80MM
-
3.3Kva 48v Inverter 145v
1. It adopts full-digital double closed loop control, combined with advanced SPWM technology to output pure sine wave.2. Two output modes: mains electricity bypass and inverter output; uninterrupted power supply.3. Four charging modes: PV Only, Mains Electricity Priority, PV Priority and PV&Mains Electricity hybrid charging.4. Advanced MPPT technology with 99.9% efficiency.5. User-defined charging parameters setting(voltage, current and mode), and suitable for various types of energy storage batteries.6. Rocker switch for AC output control.7. Power saving mode, reduce no-load loss.8. Intelligent variable-speed fan to efficiently dissipate heat and extend system lifespan.9. Lithium battery activation function, allow lead-acid battery and lithium battery access.10. All-round protection for solar panels includes overload and short circuit protection, under-voltage and over-voltage protection and reverse polarity protection.11. Support variety of user-friendly communication modules, such as RS485(GPRS, WiFi, Bluetooth), CAN and USB etc., and feasible to connect with computer and mobile phone to realize remote control.12. Available for 6 units parallel operation.
-
-
80A MPPT Solar Charger controller SCH-80A
Features
Intelligent battery management function, extend battery life
Wide PV input voltage range, convenient for system configuration.
Multiple working modes to adapt different working occasion.
Advanced PWM tracking, 99% tracking efficiency
-
APC 650VA SMART UPS -BX650LI-MS
Key Features- Early warning fault analysis on batteries
- Easy recovery from overloads
- Provides temporary battery power when the utility power is out
- Automatically steps up low voltage
- Automatically steps down high voltage to levels that are suitable for your equipment
-
APC 700VA UPS
Key Features- Output power capacity: 390 Watts / 700 VA
- Max Configurable Power (Watts): 390 Watts / 700 VA
- Nominal Output Voltage: 230V
- Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
-
APC Back-UPS 700VA – BX700UI
Key Features
LED status displayQuickly understand unit and power status with visual indicators.
Audible alarmsProvides notification of changing utility power and UPS power conditions
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
