-
12V 200AH KStar Battery
-
- 1. ROBUST TUBULAR WITH HIGH PRESSURE DIE CASTED SPINE- RESULTING LOW RATE OF SPINE CORROSION.
-
- 2. CERAMIC VENT PLUGS- SPECIAL CERAMIC VENT PLUGS FOR CONTROLLED ACID FUMES.
-
- 3. UNIQUE NEGATIVE PASTE RECIPE FOR HIGH CHARGE ACCEPTANCE
-
- 4. CONSISTENT BACKUP THROUGHOUT LIFE
-
- 5. EXCELLENT BEHAVIOR IN PSOC CONDITION
-
- 6. LOW SELF DISCHARGE
-
- 7. EXCELLENT PERFORMANCE ON DEEP CYCLIC APPLICATION
-
- 8. HIGH DESIGN & SERVICE LIFE
-
- 9. LOW CHANCE OF ACID STRATIFICATION
-
- 10. AVAILABLE IN FACTORY CHARGED CONDITION FOR READY TO USE
-
-
3.3Kva 48v Inverter 145v
1. It adopts full-digital double closed loop control, combined with advanced SPWM technology to output pure sine wave.2. Two output modes: mains electricity bypass and inverter output; uninterrupted power supply.3. Four charging modes: PV Only, Mains Electricity Priority, PV Priority and PV&Mains Electricity hybrid charging.4. Advanced MPPT technology with 99.9% efficiency.5. User-defined charging parameters setting(voltage, current and mode), and suitable for various types of energy storage batteries.6. Rocker switch for AC output control.7. Power saving mode, reduce no-load loss.8. Intelligent variable-speed fan to efficiently dissipate heat and extend system lifespan.9. Lithium battery activation function, allow lead-acid battery and lithium battery access.10. All-round protection for solar panels includes overload and short circuit protection, under-voltage and over-voltage protection and reverse polarity protection.11. Support variety of user-friendly communication modules, such as RS485(GPRS, WiFi, Bluetooth), CAN and USB etc., and feasible to connect with computer and mobile phone to realize remote control.12. Available for 6 units parallel operation. -
40A MPPT SOLAR CHARGE CONTROLLER
The Rilso Power MPK Series of solar charge controllers adopts the latest innovation of MPPT solar charge controllers. This series of solar charge controllers utilize both fan cooling and heat sink cooling system. Hence, it is rugged and performs well in various environments.
When in need of a high-performance and effective maximum power point tracking solar charge controller (MPPT), Rilso Power MPK series is one solar charge controller to consider.
The MPK series of solar charge controllers can continuously track solar panels’ maximum amount of power to charge the battery. MPK series can work with lead acid and lithium batteries. MPK series is available in 40A, 60A, 80A, and 100A.
18~150vdc 35~150vdc 60~150vdc max. pv input power 12v 520w 24v 1040w 48v 2080w
-
ABB PowerValue 11 RT 3kVA B 1 Phase Rack Mount UPS
Feature Highlights
- True online double conversion (VFI) UPS – single phase input / single phase output.
- Rack-tower convertible (90-degree rotating display).
- Best in class double conversion efficiency up to 98% to minimise energy loss.
- Optimised for modern IT loads with rated output power factor up to 1.0 (unity).
- Thinnest single phase UPS on the market at only 2 RU (rack units).
- Flexible configurations for scalable runtime by including external battery modules (EBM).
- Adjustable DC voltage and battery charger current.
- Optional external maintenance bypass with PDU (power distribution unit)
-
SRNE 3.3 kva 24v Inverter 500v
Place of OriginChinaOutput Voltage220/230vOutput Frequency50Hz/ 60HzSize378*280*103mmInverter Efficiency>95%Warranty18 monthsBrand NameSRNEOutput voltage waveformPure sine waveCertificateCE(IEC/EN62109-1,-2),ROHS2.0Rated power3.3kwColorWhiteAC charge current80APV charge current0-80AWifi functionsupportMaximum PV open circuit voltage500VBattery typeLead acid or lithium batteryWeight6.9kg -
SRNE 5kva 145v Inverter
1.Anti-backflow grid connection function, support for inverter and mains power hybrid output,
support for use without battery, can be set up for on-grid power generation.
2.Two output modes: mains bypass and inverter output; uninterrupted power supply.
3.Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar
hybrid charging.
4.Advanced MPPT technology with an efficiency of 99.9%.
5.Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
6.With time slot control, you can set the priority of using the mains and battery according to the time slot in conjunction with the local peak and valley tariffs.
7.Power saving mode available to reduce no-load loss.
8.Intelligent variable speed fan efficiently dissipate heat and extend system life.
9.Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery.
10.360 ° all-around protection with a number of protection functions.
11.Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.
-
Sukam OnLine UPS 3kVA/180V 1-Phase to 1-Phase ‘Intelli’
- Wide Input Voltage & Frequency Window
- Built-in Galvanic Isolation Transformer
- Auto-self Test on LCD Panel
- Fuzzy Logic Controlled battery charging
- Intelligent Battery Management
- Scalable Runtime
- Cold Start
-
TBB 5KW-48V Apollo Maxx 5.0S Solar Hybrid Inverter
Transformer BasedAll in one, plug and play design for easy installationApplicable for DC coupling system, solar hybrid system and power backup systemParallel and three phase capabilityTypical 0ms UPS class transfer speed, max<2msPower assist & power control enable small generator to handle big loads and meet the demand of the limited gridExtremely high inverter efficiency up to 96%Extremely high MPPT efficiency up to 98%Harmonic Distortion<2%Extremely low self-consumption powerHigh performance designed for all kinds of inductive loadsTBB premium II battery charging managementBuilt in battery SOC estimationEqualization charging program available for flooded and OPZS batteryLithium Battery charging availableBuilt in AGS functionFully programmable by APPRemote monitoring and control via Nova online portal