-
12V 200AH KStar Battery
-
- 1. ROBUST TUBULAR WITH HIGH PRESSURE DIE CASTED SPINE- RESULTING LOW RATE OF SPINE CORROSION.
-
- 2. CERAMIC VENT PLUGS- SPECIAL CERAMIC VENT PLUGS FOR CONTROLLED ACID FUMES.
-
- 3. UNIQUE NEGATIVE PASTE RECIPE FOR HIGH CHARGE ACCEPTANCE
-
- 4. CONSISTENT BACKUP THROUGHOUT LIFE
-
- 5. EXCELLENT BEHAVIOR IN PSOC CONDITION
-
- 6. LOW SELF DISCHARGE
-
- 7. EXCELLENT PERFORMANCE ON DEEP CYCLIC APPLICATION
-
- 8. HIGH DESIGN & SERVICE LIFE
-
- 9. LOW CHANCE OF ACID STRATIFICATION
-
- 10. AVAILABLE IN FACTORY CHARGED CONDITION FOR READY TO USE
-
-
-
3.3Kva 48v Inverter 145v
1. It adopts full-digital double closed loop control, combined with advanced SPWM technology to output pure sine wave.2. Two output modes: mains electricity bypass and inverter output; uninterrupted power supply.3. Four charging modes: PV Only, Mains Electricity Priority, PV Priority and PV&Mains Electricity hybrid charging.4. Advanced MPPT technology with 99.9% efficiency.5. User-defined charging parameters setting(voltage, current and mode), and suitable for various types of energy storage batteries.6. Rocker switch for AC output control.7. Power saving mode, reduce no-load loss.8. Intelligent variable-speed fan to efficiently dissipate heat and extend system lifespan.9. Lithium battery activation function, allow lead-acid battery and lithium battery access.10. All-round protection for solar panels includes overload and short circuit protection, under-voltage and over-voltage protection and reverse polarity protection.11. Support variety of user-friendly communication modules, such as RS485(GPRS, WiFi, Bluetooth), CAN and USB etc., and feasible to connect with computer and mobile phone to realize remote control.12. Available for 6 units parallel operation.
-
40A MPPT SOLAR CHARGE CONTROLLER
The Rilso Power MPK Series of solar charge controllers adopts the latest innovation of MPPT solar charge controllers. This series of solar charge controllers utilize both fan cooling and heat sink cooling system. Hence, it is rugged and performs well in various environments.
When in need of a high-performance and effective maximum power point tracking solar charge controller (MPPT), Rilso Power MPK series is one solar charge controller to consider.
The MPK series of solar charge controllers can continuously track solar panels’ maximum amount of power to charge the battery. MPK series can work with lead acid and lithium batteries. MPK series is available in 40A, 60A, 80A, and 100A.
18~150vdc 35~150vdc 60~150vdc max. pv input power 12v 520w 24v 1040w 48v 2080w
-
60A Chrisolar MPPT Solar Charge Controller
When sunlight intensity is changing continuously, an ultra-fast mppt controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower mppt controllers. you will get the best mppt solar charge controller in Nigeria on powersolutionmall.com. if you are searching for a quality & affordable charge controller, look no further, powersolutionmall.com will offer you an extensive choice with the best-case scenario costs. features: • outstanding conversion efficiency • fully programmable charge algorithm (with computer software ), and eight switches • over-temperature protection and power derating when the temperature is high. • internal temperature sensor • real-time data display options with apple and android smartphones, tablets, and other devices. package including: 1. 1pcs mppt solar charge controller 50a 100v 2. 1pcs mppt controller user manual
-
80A MPPT SOLAR CHARGE CONTROLLER (RILSO POWER)
In stock
The Rilso Power MPK Series of solar charge controllers adopts the latest innovation of MPPT solar charge controllers. This series of solar charge controllers utilize both fan cooling and heat sink cooling system. Hence, it is rugged and performs well in various environments.
When in need of a high-performance and effective maximum power point tracking solar charge controller (MPPT), Rilso Power MPK series is one solar charge controller to consider.
The MPK series of solar charge controllers can continuously track solar panels’ maximum amount of power to charge the battery. MPK series can work with lead acid and lithium batteries. MPK series is available in 40A, 60A, 80A, and 100A.
-
APC 650VA SMART UPS -BX650LI-MS
Key Features- Early warning fault analysis on batteries
- Easy recovery from overloads
- Provides temporary battery power when the utility power is out
- Automatically steps up low voltage
- Automatically steps down high voltage to levels that are suitable for your equipment
-
APC 700VA UPS
Key Features- Output power capacity: 390 Watts / 700 VA
- Max Configurable Power (Watts): 390 Watts / 700 VA
- Nominal Output Voltage: 230V
- Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
-
APC Back-UPS 700VA – BX700UI
Key Features
LED status displayQuickly understand unit and power status with visual indicators.
Audible alarmsProvides notification of changing utility power and UPS power conditions
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
-
APC Smart UPS 1500VA USB & Serial RM 2U 230V
- Brand: APC
Product Type: UPS
Model No: SUA1500RMI2U - SKU: APSUSBRMK26
- Weight (kg): 10
- Brand: APC
-
APC Smart UPS 2.2KVA SMT2200I
- Brand: APC
- Product Type: UPS
- Model No: SMT2200I
- SKU: APSUPSMTK23
- Weight (kg): 10
