-
-
20KVA (95V-280V)RELAY VOLTAGE STABILIZER
Description
₦715,300.0020KVA (95V-280V)RELAY VOLTAGE STABILIZER
₦715,300.00
-
20KVA (45V-280V)RELAY VOLTAGE STABILIZER
Description
Overview
₦600,000.00₦700,000.0020KVA (45V-280V)RELAY VOLTAGE STABILIZER
₦600,000.00₦700,000.00
-
PRAG 7.5KVA/48V Inverter 8 X 12V 220AH Battery 16 X 250W Solar Panel Roof-Top off-grid Complete Installation
- The PRAG Inverter is Easy to Install and Easy to Operate. This inverter is also Easy to Solve
- It is also designed to Operate under Harsh Environment
- The Inverter comes with the ability to do a DC Start & Automatic Self-Diagnostic Function
- It is Compatible with Both Linear & Non-Linear Load
- Low DC Voltage Supports Home & Office Appliances on the inverter
- With this PRAG Inverter, you can enjoy Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
- High Efficiency Inverter Design & “Power Saving Mode” to Conserve Energy
- Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
- 13 Vdc Inverter Battery Recover Point, Dedicated for Renewable Energy Systems
- 8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Inverter Batteries
- 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
- 8 ms Typical Transfer Time Between Utility & Inverter Battery, Guarantees Power Continuity
- 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
- Battery DOD(Depth of Discharge)setting from 50% to 100%
-
12V/24V 60A PWM SOLAR CHARGE CONTROLLER
- MCU intelligent control technology, high performance;
- Optional for Chinese and English menu，LCD+LED display mode，clearly to know the operation status;
- Solar array and battery use the same positive system, multiple independent solar array input control;
- Kinds of battery protect data setting;
- Display battery voltage, battery charge current, internal chassis temperature, accumulate photovoltaic power generation function, accumulate battery power function, accumulate power consumption function, solar panel current for each strings etc.
- Complete protect: reverse battery protection, battery overcharge protection, internal chassis cooling control(more than 45℃ the fan will turn on),battery anti-reverse charge at night time function and alarm function;
- Have history record and password protect function;
- Have time display function;
-
12V 200AH KStar Battery
-
- 1. ROBUST TUBULAR WITH HIGH PRESSURE DIE CASTED SPINE- RESULTING LOW RATE OF SPINE CORROSION.
-
- 2. CERAMIC VENT PLUGS- SPECIAL CERAMIC VENT PLUGS FOR CONTROLLED ACID FUMES.
-
- 3. UNIQUE NEGATIVE PASTE RECIPE FOR HIGH CHARGE ACCEPTANCE
-
- 4. CONSISTENT BACKUP THROUGHOUT LIFE
-
- 5. EXCELLENT BEHAVIOR IN PSOC CONDITION
-
- 6. LOW SELF DISCHARGE
-
- 7. EXCELLENT PERFORMANCE ON DEEP CYCLIC APPLICATION
-
- 8. HIGH DESIGN & SERVICE LIFE
-
- 9. LOW CHANCE OF ACID STRATIFICATION
-
- 10. AVAILABLE IN FACTORY CHARGED CONDITION FOR READY TO USE
-
-
5kVA Solar Inverter
Description
5KW-48V (3000W MPPT) Solar Inverter Features
- Pure Sine wave Solar Inverter
- Cost effective Inverter
- Inbuilt MPPT Solar Charger
- Comprehensive LCD Display: For monitoring and configuration
- Output power factor 1
- Configurable AC/Solar input priority via LCD setting
- Selectable input voltage range for home appliances and personal computers
- Selectable high charging current
- Wide DC input range
- Compatible to mains voltage or generator power
- Auto restart while AC is recovering
- Overload and short circuit protection
- Smart battery charger design for optimized battery performance
- Cold start function
- Optional anti-dusk kit
-
5kVA Adv Modular Solar Inverter
Description
- Pure Sine wave Solar Inverter
- Advanced Inverter
- In-Built MPPT solar charge controller
- Online UPS: Zero transfer time, perfect for critical devices such as Servers and ATMs
- Modular/Parallel Operation: up to 9 units of this inverter can be combined to give a maximum of 45KW
- Detachable LCD control module with multiple communications
- Built-in Bluetooth for mobile monitoring (Android App is available)
- Lithium Battery Charging Compatible
- Supports USB On-the-Go function
- Reserved communication port for BMS (RS485, CAN-BUS or RS232)
-
5.6kW Adv Modular Solar Inverter
Description
5.6KW-48V Modular (4000W MPPT) Solar Inverter Features
- Advanced Inverter
- Pure Sine wave Solar Inverter
- Customizable Status LED ring with RGB lights
- Touchable buttons with large 4.3 colored LCD
- Wide DC input range
- Supports USB On-the-Go function
- Datalog events stored in the inverter
- Built-in Wi-Fi for mobile monitoring (Android/iOS App available)
- Reserved communication port for BMS
- Battery Independency-can operate without battery connected
- Modular/Parallel Operation: up to 9 units of this inverter can be combined to give a maximum of 45KW
- Built In MPPT Solar Charge Controller: String/High PV (450V DC)
- Selectable charging current based on application
- Compatible to mains voltage or generator power
