-
POWERHUB 20KVA Voltage Stabiliizer
This Stabilizer is designed to regularize incoming NEPA/Generator voltage for all electrical and electronic appliances at homes, offices, medical & laboratory, ICT, and data centers.
SVS Stabilizer is a one size fit all device to address all electrical-related problems and it has these unique features as a comparative advantage over others, wide input voltage(80V-270V), ruggedness, and stability.
The SVS Technology is based on Servo Motor Control System plus Micro compute programmed control to prevent over or under voltage against home or office appliances connected with the Stabilizer.
Our 30 kVA voltage stabilizer static and servo-controlled solutions help your loads to have TV / Radio transmitter stations, GSM base stations, image and sound production studios, air – conditioners medical devices, hospitals, neon and laser illuminations, press and textile machines, photograph press machines, submerging pumps, ships, electric motors and all electrical devices sensitive to voltage changes. -
12V 200AH KStar Battery
-
- 1. ROBUST TUBULAR WITH HIGH PRESSURE DIE CASTED SPINE- RESULTING LOW RATE OF SPINE CORROSION.
-
- 2. CERAMIC VENT PLUGS- SPECIAL CERAMIC VENT PLUGS FOR CONTROLLED ACID FUMES.
-
- 3. UNIQUE NEGATIVE PASTE RECIPE FOR HIGH CHARGE ACCEPTANCE
-
- 4. CONSISTENT BACKUP THROUGHOUT LIFE
-
- 5. EXCELLENT BEHAVIOR IN PSOC CONDITION
-
- 6. LOW SELF DISCHARGE
-
- 7. EXCELLENT PERFORMANCE ON DEEP CYCLIC APPLICATION
-
- 8. HIGH DESIGN & SERVICE LIFE
-
- 9. LOW CHANCE OF ACID STRATIFICATION
-
- 10. AVAILABLE IN FACTORY CHARGED CONDITION FOR READY TO USE
-
-
APC Smart-UPS SRT 6000VA 230V – SRT6KXLI
Specification:
- Output Power Capacity: 2700 Watts / 3000 VA
- Max Configurable Power: 2700 Watts / 3000 VA
- Nominal Output Voltage: 230V
- Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
- Efficiency at Full Load: 95.0%
- Output Voltage Distortion: Less than 5% at full load
- Output Frequency (sync to mains): 47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal
- Topology: Line Interactive
- Waveform Type: Sine wave
- Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 3 hour(s)
- Replacement Battery: RBC55
-
APC Smart-UPS 750VA LCD 230V – SMT750I
- Output Power Capacity: 500 Watts / 750 VA
- Max Configurable Power: 500 Watts / 750 VA
- Nominal Output Voltage: 230V
- Output Voltage Distortion: Less than 5% at full load
- Topology: Line Interactive
- Waveform Type: Sine wave
- Other Input Voltages: 220, 240
-
APC Smart-UPS 3000VA 230V
Key Features- Output power capacity…………………….2.7kilowatts/3KVA
- Nominal Output Voltage…………………..230V
- Output voltage distortion………………….less than 5% at full load
- Topology………………………………………..Line Interative
- Waveform type……………………………….Sine wave
- Typical reccharge tim………………………3 hours
- Exected battery life…………………………3-5 years
- Interface ports……………………………….Smartslots,USB
- Surge Energy rating……………………….365 joules
- warranty………………………………………..two years warranty from date of purchase.
-
APC Smart-UPS 1500VA USB & Serial 230V SMC1500I
Specification:
- Battery: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Battery Life: 3 hour(s)
- Interface: DB-9 RS-232, SmartSlot, USB
- Color: Black
- Part Number: SMC1500I
- Control Panel: LED status display with load and battery bar-graphs and On Line
- On Battery : Replace Battery : and Overload Indicators
-
APC Smart-UPS 1500VA LCD 230V
APC Smart-UPS C 1500VA LCD 230V SMC1500I Uninterruptible Power Supplies (UPS)
– Battery-protected and surge-only outlets reserves power capacity and run time for connected equipment– Network manageable Provides remote power management of the UPS over the network– LED status indicators quickly understand unit and power status with visual indicators– Hot-swappable batteries ensures clean, uninterrupted power to protected equipment while batteries are being replaced– Adjustable voltage-transfer points maximizes useful battery life by widening the input voltage