• 20KVA (95V-280V)RELAY VOLTAGE STABILIZER

    Description

    • Overview

      Low, High, Fluctuating NEPA Voltage?

      One Central Stabilizer for your entire Flat, Home, Office, etc.

      Input Voltage Range of 95V-280V

      Stablize and Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.

      TMH95-20K Relay Automatic Voltage Stabilizer Series is based on digital technology; provides voltage stabilization and protection to appliances and equipment; designed as a central stabilizer to handle all house loads.

  • 20KVA (45V-280V)RELAY VOLTAGE STABILIZER

    Description

    Overview

    Low, High, Fluctuating NEPA Voltage?

    One Central Stabilizer for your entire Flat, Home, Office, etc.

    Extreme Wide Input Voltage (45-280V)

    Stablize and Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.

    TMH45-20K Relay Automatic Voltage Stabilizer Series is based on digital technology; provides voltage stabilization and protection to appliances and equipment; designed as a central stabilizer to handle all house loads.

  • PRAG 7.5KVA/48V Inverter 8 X 12V 220AH Battery 16 X 250W Solar Panel Roof-Top off-grid Complete Installation

    • The PRAG Inverter is Easy to Install and Easy to Operate. This inverter is also Easy to Solve
    • It is also designed to Operate under Harsh Environment
    • The Inverter comes with the ability to do a DC Start & Automatic Self-Diagnostic Function
    • It is Compatible with Both Linear & Non-Linear Load
    • Low DC Voltage Supports Home & Office Appliances on the inverter
    • With this PRAG Inverter, you can enjoy Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
    • High Efficiency Inverter Design & “Power Saving Mode” to Conserve Energy
    • Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
    • 13 Vdc Inverter Battery Recover Point, Dedicated for Renewable Energy Systems
    • 8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Inverter Batteries
    • 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
    • 8 ms Typical Transfer Time Between Utility & Inverter Battery, Guarantees Power Continuity
    • 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
    • Battery DOD(Depth of Discharge)setting from 50% to 100%
  • POWERHUB 20KVA Voltage Stabiliizer

    This Stabilizer is designed to regularize incoming NEPA/Generator voltage for all electrical and electronic appliances at homes, offices, medical & laboratory, ICT, and data centers.
    SVS Stabilizer is a one size fit all device to address all electrical-related problems and it has these unique features as a comparative advantage over others, wide input voltage(80V-270V), ruggedness, and stability.
    The SVS Technology is based on Servo Motor Control System plus Micro compute programmed control to prevent over or under voltage against home or office appliances connected with the Stabilizer.
    Our 30 kVA voltage stabilizer static and servo-controlled solutions help your loads to have TV / Radio transmitter stations, GSM base stations, image and sound production studios, air – conditioners medical devices, hospitals, neon and laser illuminations, press and textile machines, photograph press machines, submerging pumps, ships, electric motors and all electrical devices sensitive to voltage changes.

  • 12V 200AH KStar Battery

      1. 1. ROBUST TUBULAR WITH HIGH PRESSURE DIE CASTED SPINE- RESULTING LOW RATE OF SPINE CORROSION.
      1. 2. CERAMIC VENT PLUGS- SPECIAL CERAMIC VENT PLUGS FOR CONTROLLED ACID FUMES.
      1. 3. UNIQUE NEGATIVE PASTE RECIPE FOR HIGH CHARGE ACCEPTANCE
      1. 4. CONSISTENT BACKUP THROUGHOUT LIFE
      1. 5. EXCELLENT BEHAVIOR IN PSOC CONDITION
      1. 6. LOW SELF DISCHARGE
      1. 7. EXCELLENT PERFORMANCE ON DEEP CYCLIC APPLICATION
      1. 8. HIGH DESIGN & SERVICE LIFE
      1. 9. LOW CHANCE OF ACID STRATIFICATION
      1. 10. AVAILABLE IN FACTORY CHARGED CONDITION FOR READY TO USE

     

  • 5kVA Solar Inverter

    Description

    5KW-48V (3000W MPPT) Solar Inverter Features

    • Pure Sine wave Solar Inverter
    • Cost effective Inverter
    • Inbuilt MPPT Solar Charger
    • Comprehensive LCD Display: For monitoring and configuration
    • Output power factor 1
    • Configurable AC/Solar input priority via LCD setting
    • Selectable input voltage range for home appliances and personal computers
    • Selectable high charging current
    • Wide DC input range
    • Compatible to mains voltage or generator power
    • Auto restart while AC is recovering
    • Overload and short circuit protection
    • Smart battery charger design for optimized battery performance
    • Cold start function
    • Optional anti-dusk kit
  • 5kVA Adv Modular Solar Inverter

    Description

    • Pure Sine wave Solar Inverter
    • Advanced Inverter
    • In-Built MPPT solar charge controller
    • Online UPS: Zero transfer time, perfect for critical devices such as Servers and ATMs
    • Modular/Parallel Operation: up to 9 units of this inverter can be combined to give a maximum of 45KW
    • Detachable LCD control module with multiple communications
    • Built-in Bluetooth for mobile monitoring (Android App is available)
    • Lithium Battery Charging Compatible
    • Supports USB On-the-Go function
    • Reserved communication port for BMS (RS485, CAN-BUS or RS232)
  • 5.6kW Adv Modular Solar Inverter

    Description

    5.6KW-48V Modular (4000W MPPT) Solar Inverter Features

    • Advanced Inverter
    • Pure Sine wave Solar Inverter
    • Customizable Status LED ring with RGB lights
    • Touchable buttons with large 4.3 colored LCD
    • Wide DC input range
    • Supports USB On-the-Go function
    • Datalog events stored in the inverter
    • Built-in Wi-Fi for mobile monitoring (Android/iOS App available)
    • Reserved communication port for BMS
    • Battery Independency-can operate without battery connected
    • Modular/Parallel Operation: up to 9 units of this inverter can be combined to give a maximum of 45KW
    • Built In MPPT Solar Charge Controller:  String/High PV (450V DC)
    • Selectable charging current based on application
    • Compatible to mains voltage or generator power
  • 3kVA Solar Inverter

    Description

    3KVA-24V (1000W MPPT) Solar Inverter Features

    • Pure Sine wave Solar Inverter
    • Cost effective Inverter
    • Inbuilt MPPT Solar Charger
    • Comprehensive LCD Display: For monitoring and configuration
    • Configurable AC/Solar input priority via LCD setting
    • Selectable input voltage range for home appliances and personal computers
    • Selectable high charging current
    • Wide DC input range
    • Compatible to mains voltage or generator power
    • Auto restart while AC is recovering
    • Overload and short circuit protection
    • Smart battery charger design for optimized battery performance
    • Cold start function
    • Optional anti-dusk kit
    • Built-in MPPT solar charge controller
  • 3.6kVA Plus Solar Inverter

    Description

    3.6KW-24V (4000W MPPT) Solar Inverter Features

    • Pure Sine wave Solar Inverter
    • Inbuilt MPPT Solar Charger
    • Customizable status LED ring with RGB lights
    • Touchable button with large 4.3 colored LCD
    • Built-in WiFi for mobile monitoring (Android/iOS App available)
    • Supports USB On-the-Go function
    • Data log events stored in the Inverter
    • Reserved communication port (RS485, CAN-BUS or RS232) for BMS
    • Battery independent design
    • Battery equalization extends lifecycle
    • User-friendly LCD operation
    • Enhanced charging power
    • Optional anti-dusk kit

Main Menu