-
3.3Kva 48v Inverter 145v
1. It adopts full-digital double closed loop control, combined with advanced SPWM technology to output pure sine wave.2. Two output modes: mains electricity bypass and inverter output; uninterrupted power supply.3. Four charging modes: PV Only, Mains Electricity Priority, PV Priority and PV&Mains Electricity hybrid charging.4. Advanced MPPT technology with 99.9% efficiency.5. User-defined charging parameters setting(voltage, current and mode), and suitable for various types of energy storage batteries.6. Rocker switch for AC output control.7. Power saving mode, reduce no-load loss.8. Intelligent variable-speed fan to efficiently dissipate heat and extend system lifespan.9. Lithium battery activation function, allow lead-acid battery and lithium battery access.10. All-round protection for solar panels includes overload and short circuit protection, under-voltage and over-voltage protection and reverse polarity protection.11. Support variety of user-friendly communication modules, such as RS485(GPRS, WiFi, Bluetooth), CAN and USB etc., and feasible to connect with computer and mobile phone to realize remote control.12. Available for 6 units parallel operation.
-
3.6kVA Plus Solar Inverter
Description
3.6KW-24V (4000W MPPT) Solar Inverter Features
- Pure Sine wave Solar Inverter
- Inbuilt MPPT Solar Charger
- Customizable status LED ring with RGB lights
- Touchable button with large 4.3 colored LCD
- Built-in WiFi for mobile monitoring (Android/iOS App available)
- Supports USB On-the-Go function
- Data log events stored in the Inverter
- Reserved communication port (RS485, CAN-BUS or RS232) for BMS
- Battery independent design
- Battery equalization extends lifecycle
- User-friendly LCD operation
- Enhanced charging power
- Optional anti-dusk kit
-
3kVA Solar Inverter
Description
3KVA-24V (1000W MPPT) Solar Inverter Features
- Pure Sine wave Solar Inverter
- Cost effective Inverter
- Inbuilt MPPT Solar Charger
- Comprehensive LCD Display: For monitoring and configuration
- Configurable AC/Solar input priority via LCD setting
- Selectable input voltage range for home appliances and personal computers
- Selectable high charging current
- Wide DC input range
- Compatible to mains voltage or generator power
- Auto restart while AC is recovering
- Overload and short circuit protection
- Smart battery charger design for optimized battery performance
- Cold start function
- Optional anti-dusk kit
- Built-in MPPT solar charge controller
-
5.6kW Adv Modular Solar Inverter
Description
5.6KW-48V Modular (4000W MPPT) Solar Inverter Features
- Advanced Inverter
- Pure Sine wave Solar Inverter
- Customizable Status LED ring with RGB lights
- Touchable buttons with large 4.3 colored LCD
- Wide DC input range
- Supports USB On-the-Go function
- Datalog events stored in the inverter
- Built-in Wi-Fi for mobile monitoring (Android/iOS App available)
- Reserved communication port for BMS
- Battery Independency-can operate without battery connected
- Modular/Parallel Operation: up to 9 units of this inverter can be combined to give a maximum of 45KW
- Built In MPPT Solar Charge Controller: String/High PV (450V DC)
- Selectable charging current based on application
- Compatible to mains voltage or generator power
-
5kVA Adv Modular Solar Inverter
Description
- Pure Sine wave Solar Inverter
- Advanced Inverter
- In-Built MPPT solar charge controller
- Online UPS: Zero transfer time, perfect for critical devices such as Servers and ATMs
- Modular/Parallel Operation: up to 9 units of this inverter can be combined to give a maximum of 45KW
- Detachable LCD control module with multiple communications
- Built-in Bluetooth for mobile monitoring (Android App is available)
- Lithium Battery Charging Compatible
- Supports USB On-the-Go function
- Reserved communication port for BMS (RS485, CAN-BUS or RS232)
-
5kVA Solar Inverter
Description
5KW-48V (3000W MPPT) Solar Inverter Features
- Pure Sine wave Solar Inverter
- Cost effective Inverter
- Inbuilt MPPT Solar Charger
- Comprehensive LCD Display: For monitoring and configuration
- Output power factor 1
- Configurable AC/Solar input priority via LCD setting
- Selectable input voltage range for home appliances and personal computers
- Selectable high charging current
- Wide DC input range
- Compatible to mains voltage or generator power
- Auto restart while AC is recovering
- Overload and short circuit protection
- Smart battery charger design for optimized battery performance
- Cold start function
- Optional anti-dusk kit
-
PRAG 7.5KVA/48V Inverter 8 X 12V 220AH Battery 16 X 250W Solar Panel Roof-Top off-grid Complete Installation
- The PRAG Inverter is Easy to Install and Easy to Operate. This inverter is also Easy to Solve
- It is also designed to Operate under Harsh Environment
- The Inverter comes with the ability to do a DC Start & Automatic Self-Diagnostic Function
- It is Compatible with Both Linear & Non-Linear Load
- Low DC Voltage Supports Home & Office Appliances on the inverter
- With this PRAG Inverter, you can enjoy Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
- High Efficiency Inverter Design & “Power Saving Mode” to Conserve Energy
- Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
- 13 Vdc Inverter Battery Recover Point, Dedicated for Renewable Energy Systems
- 8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Inverter Batteries
- 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
- 8 ms Typical Transfer Time Between Utility & Inverter Battery, Guarantees Power Continuity
- 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
- Battery DOD(Depth of Discharge)setting from 50% to 100%
-
SERNE 4 by 4 Breaker cover
Models HT4830S80-145 HT4840S80-145 HT4850S80-145 AC mode Rated input voltage 220/230Vac Input voltage range (170Vac~280Vac) ±2%/(90Vac-280Vac)±2% Frequency 50Hz/ 60Hz (automatic detection) Frequency range 47±0.3Hz ~ 55±0.3Hz (50Hz);57±0.3Hz ~ 65±0.3Hz (60Hz); Overload/short circuit protection Circuit breaker Efficiency >95% Conversion time (bypass andinverter) 10ms (typical) AC backflow protection yes Maximum bypass overload current 40A Inverting mode Output voltage waveform Pure sine wave Rated output power (VA) 3000(2600/2700/3000) 4000(3480/3600/3800/4000) 5000(4350/4500/4800/5000) Rated output power (W) 3000(2600/2700/3000) 4000(3480/3600/3800/4000) 5000(4350/4500/4800/5000) Power factor 1 Rated output voltage (Vac) 230Vac(200/208/220/240Vac Settable) Output voltage error ±5% Output frequency range (Hz) 50Hz ± 0.3Hz/60Hz ± 0.3Hz Efficiency >92% Overload protection (102%<load<125%) ±10%:=”” report=”” error=”” and=”” turn=”” off=”” output=”” after=”” 5=”” minutes;<=”” p=””></load<125%)> (125%<load<150%) ±10%:=”” report=”” error=”” and=”” turn=”” off=”” output=”” after=”” 10=”” seconds;<=”” p=””></load<150%)>
Load>150% ±10%: Report error and turn off output after 5 seconds;
Peak power 6000VA 8000VA 10000VA Loaded motor capacity 2HP 3HP 4HP Output short circuit protection Circuit breaker Bypass circuit breaker specification 63A Rated battery input voltage 48V (minimum starting voltage 44V) Battery voltage range 40.0Vdc~60Vdc ± 0.6Vdc (undervoltage alarm / shutdown voltage / overvoltage alarm / overvoltage recovery…LCD screen can be set) Eco mode Load ≤50W AC charge Battery type Lead acid or lithium battery Maximum charge current 60A Charge current error ± 5Adc Charge voltage range 40 –58Vdc Short circuit protection Circuit breaker Circuit breaker specification （AC IN）63A/（BAT）125A Overcharge protection Alarm and turn off charging in 1 minute. Solar charge Maximum PV open circuit voltage 145Vdc PV operating voltage range 60-145Vdc MPPT voltage range 60-115Vdc Battery voltage range 40-60Vdc Maximum output power 4200W PV charge current range (settable) 0-80A Charge short circuit protection BAT circuit breaker and fuse Wiring protection Reverse polarity protection Authentication specification Specification certification CE(EN62109) EMC certification level EN61000,C2 Operating temperature range -15°C to 55°C Storage temperature range -25°C ~ 60°C RH range 5% to 95% (conformal coating protection) Noise ≤60dB Heat dissipation Forced air cooling, adjustable air speed Communication interface USB/RS485 (WiFi/GPRS)/Dry Node Control Dimensions (L*W*D) 482mm*425mm*133mm Weight (kg) 13.3
-
SRNE 3.3 kva 24v Inverter 500v
Place of OriginChinaOutput Voltage220/230vOutput Frequency50Hz/ 60HzSize378*280*103mmInverter Efficiency>95%Warranty18 monthsBrand NameSRNEOutput voltage waveformPure sine waveCertificateCE(IEC/EN62109-1,-2),ROHS2.0Rated power3.3kwColorWhiteAC charge current80APV charge current0-80AWifi functionsupportMaximum PV open circuit voltage500VBattery typeLead acid or lithium batteryWeight6.9kg
-
SRNE 5kva 145v Inverter
1.Anti-backflow grid connection function, support for inverter and mains power hybrid output,
support for use without battery, can be set up for on-grid power generation.
2.Two output modes: mains bypass and inverter output; uninterrupted power supply.
3.Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar
hybrid charging.
4.Advanced MPPT technology with an efficiency of 99.9%.
5.Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
6.With time slot control, you can set the priority of using the mains and battery according to the time slot in conjunction with the local peak and valley tariffs.
7.Power saving mode available to reduce no-load loss.
8.Intelligent variable speed fan efficiently dissipate heat and extend system life.
9.Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery.
10.360 ° all-around protection with a number of protection functions.
11.Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.
