| Inverter |
| Model |
XTH 6000-48 |
| Nominal battery voltage |
48 Vdc |
| Input voltage range |
38 – 68 Vdc |
| Continuous power @ 25°C |
5000 VA |
| Power 30 min. @ 25°C |
6000 VA |
| Power 5 sec. @ 25°C |
15 kVA |
| Maximum load |
Up to short-circuit |
| Asymmetric load |
Up to Pcont. |
| Load detection (stand-by) |
2 to 25 W |
| Cos j |
0.1-1 |
| Maximum efficiency |
96 % |
| Consumption OFF/Stand-by/ON |
1.8 W / 2.2 W / 22 W |
| Output voltage |
Pure sine wave 230 Vac (± 2 %) / 120 Vac (1) |
| Output frequency |
Adjustable 45 – 60 Hz (1) ± 0.05 % (crystal controlled) |
| Harmonic distortion |
< 2 % |
| Overload and short-circuit protection |
Automatic disconnection with 3 time restart attempt |
| Overheat protection |
Warning before shut-off – with automatic restart |
| Battery charger |
| Charge Characteristic |
6 steps: Bulk, Absorption, Floating, Equalization, reduced floating, periodic absorption
Number of steps, thresholds, end current and times completely adjustable with the RCC-02/-03 |
| Maximum charging current |
100 A |
| Temperature compensation |
With BTS-01 or BSP 500/1200 |
| Power Factor Correction (PFC) |
EN 61000-3-2 |
| General data |
XTH 6000-48 |
| Input voltage range |
150 to 265 Vac / 50 to 140 Vac (1) |
| Input frequency |
45 to 65 Hz |
| Input current max. (transfer relay) / Output current max. |
50 Aac / 56 Aac |
| Transfer time |
<15 ms |
| Multifunction contacts |
2 independent contacts (potential free 3 points, 16Aac / 5Adc) |
| Weight |
42 kg |
| Dimensions h/w/l [mm] |
230 / 300 / 500 |
| Protection index |
IP20 |
| EU declaration of conformity |
Low Voltage Directive (LVD) 2014/35/EU:
– EN 50178:1997
Electromagnetic Compliance (EMC) Directive 2014/30/EU:
– EN 62040-2:2006, EN 61000-3-2:2014, EN 61000-3-12:2011 |
| Operating temperature range |
-20 to 55°C |
| Relative humidity in operation |
95 % without condensation |
| Ventilation |
Forced from 55°C |
| Acoustic level |
< 40 dB / < 45 dB (without/with ventilation) |
| Warranty |
5 years |
| ISO Certification |
9001:2008 / 14001:2004 |
| Accessories |
| Remote control RCC-02 or RCC-03 |
Adjustable with the RCC-02/-03 |
| Module Xcom-232i |
Adjustable with the RCC-02/-03 |
| Communication sets Xcom-LAN / Xcom-GSM / Xcom-SMS |
Adjustable with the RCC-02/-03 |
| Battery Status Processor BSP |
Adjustable with the RCC-02/-03 |
| Remote Control Module RCM-10 (3 m) |
Adjustable with the RCC-02/-03 |
| 2 aux. contacts module ARM-02 |
|
| Cooling Module ECF-01 |
|
| Battery temp. sensor BTS-01 (3 m) |
Adjustable with the RCC-02/-03 |
| Communication cable for 3ph and // CAB-RJ45-8-2 |
Adjustable with the RCC-02/-03 |
| Mounting frame X-Connect |
There are no reviews yet.