Rated Capacity 8 KVA
Output Power 6400 Watts
Battery 10 Battery System (120 VDC)
Waveform Pure Sinewave
Based on 0 reviews
Be the first to review “Microtek Inverter 9KVA-120V”
Related products
-
Inverters, Studer
8.0kVA – 48V Inverter – Studer Xtender XTH 8000
Specifications
Inverter Model XTH 6000-48 Nominal battery voltage 48 Vdc Input voltage range 38 – 68 Vdc Continuous power @ 25°C 5000 VA Power 30 min. @ 25°C 6000 VA Power 5 sec. @ 25°C 15 kVA Maximum load Up to short-circuit Asymmetric load Up to Pcont. Load detection (stand-by) 2 to 25 W Cos j 0.1-1 Maximum efficiency 96 % Consumption OFF/Stand-by/ON 1.8 W / 2.2 W / 22 W Output voltage Pure sine wave 230 Vac (± 2 %) / 120 Vac (1) Output frequency Adjustable 45 – 60 Hz (1) ± 0.05 % (crystal controlled) Harmonic distortion < 2 % Overload and short-circuit protection Automatic disconnection with 3 time restart attempt Overheat protection Warning before shut-off – with automatic restart Battery charger Charge Characteristic 6 steps: Bulk, Absorption, Floating, Equalization, reduced floating, periodic absorption
Number of steps, thresholds, end current and times completely adjustable with the RCC-02/-03Maximum charging current 100 A Temperature compensation With BTS-01 or BSP 500/1200 Power Factor Correction (PFC) EN 61000-3-2 General data XTH 6000-48 Input voltage range 150 to 265 Vac / 50 to 140 Vac (1) Input frequency 45 to 65 Hz Input current max. (transfer relay) / Output current max. 50 Aac / 56 Aac Transfer time <15 ms Multifunction contacts 2 independent contacts (potential free 3 points, 16Aac / 5Adc) Weight 42 kg Dimensions h/w/l [mm] 230 / 300 / 500 Protection index IP20 EU declaration of conformity Low Voltage Directive (LVD) 2014/35/EU:
– EN 50178:1997
Electromagnetic Compliance (EMC) Directive 2014/30/EU:
– EN 62040-2:2006, EN 61000-3-2:2014, EN 61000-3-12:2011Operating temperature range -20 to 55°C Relative humidity in operation 95 % without condensation Ventilation Forced from 55°C Acoustic level < 40 dB / < 45 dB (without/with ventilation) Warranty 5 years ISO Certification 9001:2008 / 14001:2004 Accessories Remote control RCC-02 or RCC-03 Adjustable with the RCC-02/-03 Module Xcom-232i Adjustable with the RCC-02/-03 Communication sets Xcom-LAN / Xcom-GSM / Xcom-SMS Adjustable with the RCC-02/-03 Battery Status Processor BSP Adjustable with the RCC-02/-03 Remote Control Module RCM-10 (3 m) Adjustable with the RCC-02/-03 2 aux. contacts module ARM-02 Cooling Module ECF-01 Battery temp. sensor BTS-01 (3 m) Adjustable with the RCC-02/-03 Communication cable for 3ph and // CAB-RJ45-8-2 Adjustable with the RCC-02/-03 Mounting frame X-Connect SKU: n/a
There are no reviews yet.