Rating input voltage |
2000 VA / 1200 W |
Rating input frequency |
60/50Hz (auto sensing) |
Input phase |
Single-phase |
Input socket |
With Fuse |
Cold Start (0 to 100% load) |
Press the ON/OFF Switch |
Input Range (220V) |
140-300 |
Rating output(VA) |
2000 |
Rating output (W) |
1200 |
Power factor |
0.6 |
Rating output voltage (V) |
220 |
Waveform |
Battery mode (simulated sine wave),
AC mode(sine wave) |
AC Voltage Regulation |
±10% (Battery mode) |
Rear output socket |
4 x Universal – Battery backup |
Waveform |
Simulated Sine Wave (Battery mode) |
Line Mode |
Synchronize with the utility |
Rating frequency |
60Hz or 50 Hz ± 1 Hz |
Battery Mode |
Yellow flashing |
Short circuit protection Line Mode |
Fuse & Firmware protection |
Short circuit protection Battery Mode |
Firmware Protection |
Overload protection Line Mode |
110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. |
Overload protection Battery Mode |
110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately |
Indicators AC mode |
Green Lighting |
Indicators Battery Mode |
Yellow Flashing |
Indicators Fault |
Red Lighting |
Alarm Battery Mode |
Sounding every 10 Seconds |
Alarm Low Battery |
Sounding every Second |
Alarm Overload |
Sounding every 0.5 second |
Alarm Fault |
Continuously sounding |
Full Protection |
Overload, discharge, and
Overcharge protection |
Transfer Time |
Typical 2-6ms, 10ms max. |
Transfer Time |
Typical 2-6ms, 10ms max. |
Communication Interface |
Optional RS232/RJ11 |
Battery and runtime Rating |
2 X 12V/9AH |
Recharge time – Typical |
6-8 hours recover to 90% capacity |
Charge current |
About 1A at normal mode. |
Dimension, W X H X D (cm) |
22.5 X 12.5 X 39 |
Net Weight (kgs) |
12.7KGS |
Humidity |
0-90 % RH @ 0- 40°C (non-condensing) |
Noise Level |
Less than 45dB |
Compatible with OS |
Supports Windows®
2000/2003/XP/Vista/2008/7 |
Communication interface |
Elite 2000pro (N/A),
Elite 2000ipro (USB/RJ11) |
There are no reviews yet.