- Holds 4 units of 12V-200AH Batteries.
- PRAG Inverter can be fitted on top of Rack.
- Saves on floor space and provides neat and compact installation.
- Multiple units of Racks can be stacked vertically and horizontally.
High reliable system
Advanced digital automatic control technology to ensure the power durable and reliable
Strong Environment Adaptability
Wide input voltage and frequency range to avoid frequent switching.
Intelligent charging mode.
Shutdown charging function.
Three steps charging mode
Full Display Information
LCD Display: Input voltage, Input frequency, Output voltage, Output frequency, Battery voltage, PV input voltage, Solar charger, Full load, Temperature, Failure.
LCD Display Mode
Full Display Function
Inverter short circuit and overload protection function.
Battery over discharge protection.
Solar cell module polarity reverse connection protection.
Solar charge controller, inverter and other internal short circuit protection.
Wide input voltage range
Fully digitized microprocessor control
UPS mode and inverter mode suit for different application
LCD displays comprehensive parameters (Optional)
Short circuit and overload protection
Intelligent battery management
Changing current is optional
Compatible with generator
|Parallel Capability||Yes, 9 Units|
|Selectable Voltage Range||170 – 280 VAC (For Personal Computer); 90-280 VAC (For Home Appliances)|
|Frequency Range||60/50 Hz (Auto Sensing)|
|AC Voltage Regulation (Batt. Mode)||230 VAC ±5%|
|Surge Power||10000 VA|
|Transfer Time||1o ms (For Personal Computers); 20 ms (For Home Appliances)|
|Waveform||Pure Sine Wave|
|Battery Voltage||48 VDC|
|Floating Charge Voltage||54 VDC|
|Overcharging Protection||66 VDC|
|SOLAR CHARGER & AC CHARGER|
|Solar Charger Type||MPPT|
|Maximum PV Array Open Circuit Voltage||450 VDC|
|Maximum PV Array Power||4500 W|
|MPPT Range @ Operating Voltage||120 VDC ~430 VDC|
|Maximum Solar Charge Current||80 A|
|Maximum AC Charge Current||80 A|
|Maximum Charge Current||80 A|
|Dimension, D x W x H (mm)||120 x 295 x 468|
|Net Weight (Kgs)||11|
|Operating Humidity||5% to 95% Relative Humidity (Non – condensing)|
|Operating Temperature||0C to 55C|
|Storage Temperature||-15C to 60 C|
PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%.
So, it is packed with unique features and it is one of the most advanced inverter/chargers in the market today.
Furthermore, the PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.
Subsequently, PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.
PRAG 6.5KVA – 48V Inverter Features
The PRAG Inverter is Easy to Install and Easy to Operate. This inverter is also Easy to Solve
It is also designed to Operate under Harsh Environment
The Inverter comes with the ability to do a DC Start & Automatic Self-Diagnostic Function
It is Compatible with Both Linear and Non-Linear Load
Furthermore, Low DC Voltage Supports Home and Office Appliances on the inverter
With this PRAG Inverter, you can enjoy Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
High Efficiency Inverter Design and “Power Saving Mode” to Conserve Energy
Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
13 Vdc Inverter Battery Recover Point, Dedicated for Renewable Energy Systems
8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Inverter Batteries
4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
8 ms Typical Transfer Time Between Utility and Inverter Battery, Guarantees Power Continuity
15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
Battery DOD(Depth of Discharge)setting from 50% to 100%